Other engines

Some situations require a specific type of motor. For this, we have products such as vibration motors, saw motors and stainless steel motors. Click on the link to read in more detail about the other motors we have in our range that are so distinctive that they do not fit under standard motors.

Data sheets, drawings, prices Visit our inventory search/online store

PM (permanent magnet) motors use magnets to create a magnetic field, unlike an induction motor where a current is induced in the rotor which in turn creates the magnetic field. As a result, the losses in a PM motor are lower than in an induction (asynchronous) motor. Lower losses mean that you can get higher power out of a given motor size.

Innomotics permanent magnet motors

Advantages:

Has synchronous speed, which can eliminate the need for encoders when precise control is required.

High efficiency

High power output

Interchangeable with existing IEC motors

Suitable for high speeds (4500rpm and above)

Constant torque at variable speed

Applications:

Injection molding
Conveyors
Extrusion
Milling machines
Planing machines
Crushers
Shredders
Elevators
Cranes
Lifts

With Busck brake motors you get both reliability and dependability. The electric motors have a fast braking time (connection and disconnection time = 5~80 milliseconds).

Busck brake motors have protection class IP54 and are designed according to insulation class F. Standard voltage is 230/400 V 50 Hz up to and including 3 kW. Above that, the voltage is 400/690 V. The motors have sealed bearings that are grease-filled for many years of operation.

Busck brake motors are made of aluminum and have detachable feet. The electric motors are equipped with a DC brake that is fed over a half-wave rectifier. Up to 3 kW, the brake coil has a voltage of 103 V and the rectifier is a fast type fed 230 V. From 4 kW onwards, the brake coil is at 180 V and the rectifier is fed 400 V. The braking torque is fixed and cannot be adjusted.

Manual

Stainless steel electric motors for hygienic environments

Stainless steel electric motors are designed for use in the food industry, pharmaceutical industry and other environments where high hygiene standards are required and the equipment is subjected to frequent and heavy rinsing.

The smooth, paint-free surfaces of the motors without heat sinks prevent dirt accumulation and simplify cleaning. Labeling data is engraved to reduce the risk of bacterial growth. They are IP69K sealed and non-ventilated (IC410), making them resistant to pressure washing, high temperatures and aggressive cleaning agents.

The motors are made of acid-proof AISI 316L stainless steel with AISI 420 shaft, which provides high corrosion resistance and long life. Viton oil seals, smooth outer surfaces and EHEDG-compliant stainless steel cable glands contribute to optimal hygiene.

They are adapted for continuous operation (S1), can handle inverter operation with constant torque, and have a surface temperature limited to 60 °C at 20 °C ambient thanks to efficient electromagnetic design.

Standard version: 3×230/400 V, 50 Hz.

EMG saw motors meet your requirements with both their technical data and their shape. With a shaft height of only 66 mm, EMG saw motors are particularly suitable for the direct drive of circular saws. Other typical applications for this motor type are for lathes, band saws, drilling, milling and grinding machines.

The motor housing of the saw motors is made of an extruded aluminum profile with die-cast aluminum bearing shields. The motors are supplied as standard with a blade holder and built-in electromechanical brake.

3-phase normally from stock. This motor type can also be ordered in 1-phase.

Catalog page

Vibration motors are used for feeding components, cleaning filters, silos and vibrating concrete, among other things. We offer OLI's standard range, which is suitable for all types of vibrating equipment, in virtually all industries. The motors are also available for application in the presence of potentially flammable dust in hazardous environments.

OLI vibration motors

OLI is one of the leading manufacturers of vibration motors. This type of electric motor is used for feeding components, cleaning filters, silos and vibrating concrete.

II3 D Ex tD A22 Tx IP66. The motors can be used in zone 22 according to directive 94/9/EC. Approval TÜV 05 ATEX 2768X. Vacuum impregnated winding with insulation class F guarantees reliability and long life. Thermistors 130 °C are standard from size 60 upwards. 3-phase 230 / 400 V 50 Hz or 400 / 690 V 50 Hz. 460 V 60 Hz and other voltages can also be supplied. The 3-phase motors are designed for inverter operation from 20 Hz up to nominal frequency.

Aluminum frame up to size 50 and ductile iron frame from size 60. Cast iron bearing shields up to size 90 and ductile iron from size 100. Eccentric weights are adjustable.

Catalog pages